12V Low Flow
ESP's Intermittent or skip Bonded tubing is a two-tube bonded configuration. The tubes are color-coded to prevent line crossing and make for easier identification. The durable and lightweight properties all make bonded tubing an ideal choice for a wide spectrum of uses including environmental water sampling, well testing, remediation, and monitoring equipment. ESP's Bonded tubing is the leading choice for bladder pump sample tubing.
What is a skip-bond? A: The bond between the two tubes runs every other 6". This means there is a 6" gap between the bond lines where no bond has taken place. This reduces the need for separation or splitting back the tubes wherever a cut is needed. by using the skip section of tubing, you ensure a tight seal between compression fittings because there will not be any weld residue in that section. For questions about bulk orders, please call us at 888-511-4377
Tubing A: Tubing Material: Polyethylene Tubing Type: Low Density / LDPE Tubing Color: Natural Inside Diameter: .17" or 11/64" Outside Diameter: .25" or 1/4" Wall Thickness: .040" Length: 500' Max Pressure: 135 PSI at 72°F Temp Range: -93°F - +184°F Hardness, Shore D: 50 Tensile Strength: 1700 PSI
Tubing B: Tubing Material: Polyethylene Tubing Type: Low Density / LDPE Tubing Color: Blue Inside Diameter: .17" or 11/64" Outside Diameter: .25" or 1/4" Wall Thickness: .040" Length: 500' Max Pressure: 135 PSI at 72°F Temp Range: -93°F - +184°F Hardness, Shore D: 50 Tensile Strength: 1700 PSI